Champ AI
November 20, 2026

Claim.MD Clearinghouse: Enrollment, Fees and What Still Goes to Paper

Claim.MD enrolls claims, ERA and eligibility separately, Quick Enroll times out after 30 days, and paper or fax costs extra. Here's what billing teams should plan for.

Trevor Tang
Trevor TangFounding GTM/Solutions Engineer

Updated November 19, 2026, based on Claim.MD's pricing page, payer list and help center as of that date.

On Claim.MD, each provider enrolls separately for claims, ERA and eligibility with every payer, and the one-click Quick Enroll covers only ERA and eligibility. Quick Enroll times out if no claims go out within 30 days. Claims and appeals that Claim.MD faxes or mails for you cost $1.00 each for up to five pages and $0.20 for each page after that, according to Claim.MD's published pricing.

At a billing company, those rules shape onboarding. Each client needs an enrollment track per transaction and payer, and Quick Enroll has to line up with the first claims. For what any clearinghouse does and doesn't handle, start with what a medical billing clearinghouse is.

Claims, ERA and eligibility are enrolled separately

Claim.MD's provider enrollment guide shows each payer with three status columns: 1500 claims, ERA and eligibility. "Each of these transactions requires separate enrollment for each payer." The guide lists four statuses:

  • No Enrollment Required: claims can go out right away.
  • Auto-Enroll: ERA starts automatically once you submit claims through Claim.MD.
  • Enrollment Required: payer-specific paperwork or a payer portal.
  • Quick Enroll: one-click enrollment, for ERA and eligibility only.

A fifth label, Not Available, "means electronic enrollment is not supported for that payer."

Enrollment Required leads to one of two paths. Claim.MD shows either pre-filled paperwork, which Claim.MD's quick start guide says it can mail or fax for you "in most cases," or instructions for a payer's own enrollment portal. For Medicare Part B and similar payers, an authorized user must sign. The guide also says "some enrollments require additional paperwork outside the system." For portal enrollments, Claim.MD warns to use only its links, not ones found through a search.

A provider's first enrollment normally triggers provider validation. Until it's done, the quick start guide says, the provider "may not be able to submit or receive transactions such as Claims, ERA, or Eligibility." The provider validation guide says Claim.MD calls a phone number listed for the NPI in NPPES, and someone there approves the setup. If no one at those numbers can, have a provider representative expect the call or update NPPES and retry. Claims to No Enrollment Required payers can go out first, but ERA enrollment waits on validation.

Quick Enroll times out after 30 days without claims

Quick Enroll works with payers that "have pre-authorized Claim.MD" for ERA and eligibility. The enrollment guide sets three conditions:

  • Providers must already be credentialed with the payer.
  • Eligibility through Quick Enroll becomes available "within 24 to 48 hours."
  • "Providers must submit their first claims within 30 days of Quick Enroll activation. If enrollment times out, re-enrollment will be required."

That last rule catches billing companies that enroll a new client's full payer list on day one and then wait on credentialing, data migration or the first charge batch. Enroll in waves that match when claims will actually start for each payer, or plan to ask Claim.MD support to reset Quick Enroll.

Claim.MD can't confirm when claim enrollment is done

The enrollment guide is direct about this: "Claim.MD cannot track claim submission enrollments in the same way it tracks ERA enrollments, so the claim submission enrollment status will not update to Completed." Once the payer confirms its requirements are met, you can start sending claims.

Another note in the guide says ERA statuses may not always show Completed either. So your team needs its own record of each payer's approval: the date, the confirmation and who gave it. A claim sent before the payer has finished setup may be rejected, so check the payer's EDI enrollment status before you resubmit.

ERAs go to one clearinghouse at a time

Claim.MD's quick start guide warns that "ERA can only be returned to one clearinghouse." Enrolling for ERA re-routes all remittance for that NPI and tax ID to Claim.MD, wherever the claims were sent from.

That cuts both ways. Enrolling a client's ERAs with Claim.MD can pull them away from another system that still needs them. Leaving Claim.MD means re-enrolling ERAs with each payer through the new route. If another Claim.MD account already receives ERAs for the NPI and tax ID, Claim.MD asks after validation whether to route them to the new account.

Claim.MD's pages give two timelines. The quick start guide says ERA enrollments "generally process between 3 and 30 days." The View ERA guide says the process "typically takes at least a week" and advises watching both the old system and Claim.MD for the first two weeks so no ERAs are missed. They also differ on follow-up: the View ERA guide says to contact the payer's ERA department after a week, and the quick start guide says to contact the payer after the 3 to 30 days. Ask Claim.MD support which to use.

Claim.MD's Manage Claims guide adds an ERA alert. By default, it flags claims with no ERA after 30 days, and you can change that window. If the payer has paid but the ERA isn't in Claim.MD, the View ERA guide asks for a Missing Remittance (ERA) ticket with the check number, payment amount and payment date. Our guide to ERA enrollment timelines covers the other reasons ERAs stop arriving.

What Claim.MD charges

Claim.MD's pricing page lists three plans, with no setup fee or per-provider fee on any of them:

  • Unlimited, $120 a month: unlimited claims and ERA, plus 1,000 eligibility checks a month. Extra eligibility checks are $0.02 for "Prime" payers and $0.10 for others. One billing tax ID is included, and more are $30 to $6 a month on tiered pricing.
  • Small Volume, $60 a month: 100 claims, ERA and eligibility a month. Extras are $0.50 each.
  • Basic, $30 a month: nothing included, and $0.30 per claim, ERA or eligibility check.

Extra ERA on the Small Volume and Basic plans is charged "per claim response (CLP)," so an 835 covering 40 claims would count as 40 responses, not one. On every plan, paper and faxed claims or appeals are $1.00 each for up to five pages and $0.20 for each page after that. Attachments are $0.60 each.

Claim.MD's payer list marks which payers support Prime Eligibility, but the pricing page doesn't define it. Ask Claim.MD which of your payers bill at the Unlimited plan's $0.02 rate before you budget on it.

Price each plan with real monthly counts per tax ID, including 835 claim lines, not just ERA files.

Some claims and appeals still go to paper or fax

Claim.MD's guide to entering claims covers claims you send by fax or mail:

  • To fax, set the payer ID to FAX01 and put the payer's fax number in the Address 2 field. The cover sheet can't be customized.
  • To mail, set the payer ID to PAPER and enter the payer's address yourself. "Claim.MD does not maintain a list of payer addresses."
  • You can print and mail the claim yourself, or have Claim.MD print and send it.

USPS scans may show in the claim's history, but Claim.MD says "there is no formal tracking available."

Appeals follow the same pattern. The View/Edit Claims guide says a Send Electronic Appeal option appears only when the payer accepts electronic appeals. Otherwise, Claim.MD can mail the appeal first class or fax it, at the paper and fax rates above, or you can download the appeal packet and send it yourself. The appeal screen offers a default payer address, though the claim entry guide says Claim.MD keeps no payer address list. Check it against the payer's current appeals instructions.

Paper claims return no electronic acknowledgment. Put each on a follow-up list and check status by portal or phone after the payer's normal processing time. Our guide to claim status follow-up covers when to use each channel.

Rejections can come from three places

The Manage Claims guide says rejected claims can come from Claim.MD's own validation, from a payer's trading partner or other intermediary, or from the payer. Use Show History / Notes on a claim to see which one rejected it. Red errors must be fixed before you resubmit. Yellow errors flag NCCI edits and other likely problems, but the claim can still go out.

The same guide adds two follow-up points:

  • "Transmitted" doesn't confirm the payer received the claim. Claim.MD says the timing varies by payer but a payer acknowledgment is "typically expected within 48 hours," and it raises a Missing Acknowledgement alert if none arrives.
  • Payers run front-end edits on their EDI side, which "can take up to a week." Until a claim clears them, provider services may say it never arrived. If the EDI department rejects it, provider services "will not be aware it was ever submitted."

When a payer rep finds no claim on file, check Claim.MD's history for an acknowledgment or rejection before resubmitting.

Frequently asked questions

How much does Claim.MD cost?

Claim.MD's pricing page lists Unlimited at $120 a month, Small Volume at $60 and Basic at $30, plus per-transaction fees beyond what each includes. Faxed or mailed claims and appeals are $1.00 for up to five pages plus $0.20 per added page.

Does Claim.MD Quick Enroll work for claims?

No. Claim.MD's enrollment guide says Quick Enroll is for ERA and eligibility only. Claim enrollment follows each payer's paperwork or portal process.

Why does my Claim.MD claim enrollment still not say Completed?

Claim.MD says it can't track claim enrollments the way it tracks ERA enrollments, so the status won't update. Once the payer confirms it has approved you, you can start submitting.

How long does Claim.MD ERA enrollment take?

Claim.MD's quick start guide says 3 to 30 days, and its View ERA guide says at least a week. The two guides give different points to contact the payer, a week or the end of that window, so confirm with Claim.MD support.

Can I use Claim.MD for ERAs while another clearinghouse sends my claims?

Claim.MD says ERA can return to only one clearinghouse, and enrolling with it re-routes all ERAs for that NPI and tax ID to Claim.MD wherever the claims were sent from. Plan the switch so no system that still needs the 835s loses them.

Following up on Claim.MD claims across portals and phone?

Champ automates the portal, document and phone work that healthcare back offices still do by hand, like eligibility checks on payer portals. We set it up and run it, so your team sees only the finished results. If enrollment gaps and paper follow-up are slowing your AR, learn more here.

This post is general information, not legal, compliance or billing advice. Fees, payer support and enrollment rules vary by account and payer and change often, so confirm with Claim.MD and each payer before acting. Champ is not affiliated with or endorsed by Claim.MD.

Continue reading

See all

Do the work of fifty
without hiring one more.

Eligibility
Verification
Claims
Payroll
Carrier check-in
Patient intake
Benefits
Credentialing
Credentialing